Hoft & Wessel HW 90396 Скачать руководство пользователя страница 49

Страница: 49 / 97

MAINTENANCE AND SUPPORT

2.01

•

25.03.2010 49

4.12

Replacing the Cover

The cover is pushed in flush with the underside of the
skeye.pos mobile. The cover has a recessed grip that allows you to push it in and
pull it out. If your device is equipped with wireless functions, this cover contains
components.

Fig. 37: Pushing in the cover

Carry out the following steps to replace the cover:

1. Press the yellow button to switch off the skeye.pos mobile.

The display goes out and the skeye.pos mobile switches to "Suspend Mode".

2. Remove the battery (see Ch. 4.7, Page 26).

3. Press the "Battery Eject Button" and pull out the cover from the

skeye.pos mobile by applying light pressure to the recessed grip.

4. Press the cover into the skeye.pos mobile until it is completely fitted and

encounters a natural resistance.

5. Insert the battery (see Ch. 4.8, Page 26).

6. Slide the battery lock to the right to the symbol

The battery is now locked and you can switch on the skeye.pos mobile.

7. Press the yellow button to switch on the skeye.pos mobile.

The display lights up and the application starts.

Battery Eject
Button

Battery Lock

Содержание HW 90396


































































































Результаты поиска

Содержание HW 90396

Отзывы:

Hoft & Wessel HW 90396, Инструкция по эксплуатации, Страница: 49 / 97

Результаты поиска

Содержание HW 90396

Отзывы: