Hoft & Wessel HW 90396 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 97

Hoft & Wessel HW 90396 Скачать руководство пользователя страница 24

USER INSTRUCTIONS

24

2.01

•

25.03.2010

Fig. 11: Rear view of the skeye.pos mobile; correctly fitted battery

5. Slide the battery lock to the right to the symbol

.

The battery is now locked and you can switch on the skeye.pos mobile.

Fig. 12: Top view of the skeye.pos mobile

6. Press the yellow button on the skeye.pos mobile.

The display lights up and the application is started.

If you cannot start the skeye.pos mobile, carry out a reset.

If the skeye.pos mobile automatically switches to "Suspend Mode" due to an empty
battery, it cannot be switched on again.

However, the user still has time to replace the battery without losing any data. The
user receives several warnings in good time before this occurs.

If the battery is not replaced, the skeye.pos mobile switches to the "Partially Off"
status before the battery is fully discharged. If the device is left in the "Partially Off"
status for more than 20 days, it switches to the "Complete Off" status to conserve
the floating battery.

The skeye.pos mobile cannot be switched on using the yellow button when it is in
the "Complete Off" status. To do this, you must reset the skeye.pos mobile.

Battery

Battery Lock

Yellow On/Off
Button

Switching on the
skeye.pos mobile

«
...
22
23
24
25
26
...
»

Содержание HW 90396


































































































Отзывы:

Нет отзывов