MAINTENANCE AND SUPPORT
44
2.01
•
25.03.2010
4.9.4
Cleaning the Paper Recess, Sensor and Light Barrier
When cleaning, avoid touching the paper cutter on the skeye.pos mobile. The
paper cutter is fitted with numerous sharp teeth that could easily cut your
fingers.
Use only compressed air for cleaning! Do not blow with your mouth as this
could blow paper dust into your eyes.
1. Open the printer cover; to do this, turn the printer cover release lever upwards.
2. Remove the paper roll from the paper recess.
Fig. 32: The opened printer cover
3. Use compressed air to clean inside the paper recess.
4. Use compressed air to clean the out-of-paper sensor.
Only blow on the out-of-paper sensor! Cleaning it using a cloth or your finger will
push in the out-of-paper sensor and lead to malfunctions!
5. Carefully clean the light barrier windows using a soft, dry, clean and lint-free
cloth.
6. Wipe down the paper recess using a clean dry cloth.
7. Insert the paper roll into the paper recess (see Ch. 4.5).
8. Close the printer cover until it locks into place.
Light Barrier Windows
Out-of-Paper
Sensor
Paper
Compartment
Paper Cutter