Hofmann geodyna 7340, Руководство по эксплуатации

Страница: 86 / 160

86
5-39
21
5-40
5-41
5-42
20
28 21 29
26
Operation
5.11.3 Start optimisation or weight
minimisation
Procedure:
— Clamp the wheel or bare rim.
—
Enter correct rim dimensions, or check existing
inputs for correctness.
—
Close the wheel guard (if necessary press the
START key).
— Starting from the BALANCING Menu press key 20
( Fig. 5-39 ).
The OPTIMISATION screen is displayed ( Fig. 5-40 ).
If an optimisation/minimisation is present in the
memory, press key
21 ; in this way, the program
continues from the step in which it was interrupted,
with the relevant measurement values and settings,
and the optimisation/minimisation may continue.
Now it is possible to choose whether to continue with
Optimisation (Key 28 ), or with Minimisation (Key 29 ).
5.11.3.1 OPTIMISATION
—
Clamp the rim only.
— Move the gauge arm into position on the rim, based
on the desired ALU.
— Perform a measuring run.
—
In the BALANCING Menu press key 20 ( Fig. 5-39 ).
— Press key 28 ( Fig. 5-40 ).
The “OP1” screen page appears ( Fig. 5-41 ).
— Press key 26 for confi rmation ( Fig. 5-41 ).
— The OPTIMISATION “OP.2” screen is displayed
( Fig. 5-42 ).
..
..
..
.
..
. .
..
.