Hoffrichter VECTOR et Auto Скачать руководство пользователя страница 19

Страница: 19 / 80

Description of device

POWER SUPPLY

External switched-mode power supply

For mains operation the VECTOR et has an external switching power supply
with a wide input range of 100 - 240 V alternating current (AC), 50 - 60 Hz.

Thus it is possible to connect it to an energy supply anywhere in the world.

DC vehicle cable

For mobile use of the VECTOR et, e.g., in a truck or a caravan, it is possible to
operate it with a 24 V direct current (DC). For this you will need the optionally
available DC vehicle cable.

Only use the optional DC vehicle cable to connect the device to a
DC power supply and do not connect the device to a PC while it is
being used.

VECTOR et CPAP

The CPAP device is a therapy device for treating obstructive sleep apnea.

For this purpose the device provides a continuous positive air pressure.

Apart from the conventional CPAP-mode the device offers a proportional

increase in pressure in the FLEXLINE mode to the individual breath

during inspiration and a pressure drop during the expiration. This intel-
ligent method of pressure adjustment makes a careful therapy possible.

Содержание VECTOR et Auto

















































































Результаты поиска

Содержание VECTOR et Auto

Отзывы:

Hoffrichter VECTOR et Auto, Руководство пользователя, Страница: 19 / 80

Результаты поиска

Содержание VECTOR et Auto

Отзывы: