Hoffmann MORSO NFXL, Руководство по эксплуатации

Страница: 28 / 50

27
Instruction Manual
MORSØ Notch Cutting Machine
Model NFX
Lubrication Instructions
Approx. every two weeks lubricate the following:
The guides for
1. Knife block (5)
(Fig.
H-1-1)
2. Slide Frame (3)
(Fig.
H-1-1)
3. Cross (4) (lubricates simultaneously the forward movement of the knife block).
(Fig.
H-1-1)
4. Links for the draw bar (15) of the knife block.
(Fig.
H-1-1)
5. All links in the lever system (2), incl. spring suspension.
(Fig.
H-1-2)
Lubricant: Any acid-free oil.
Cleaning
MORSØ-NFX must be cleaned thoroughly after use.
Remove any waste wood from all the guides.
Remove the waste wood from behind the machine.
Resin from the mouldings can sometimes cause the knife blades to drag on the upward
action of the knife block. To remove this resin, use WD 40, sprayed onto a cloth made in the
shape of a ball (so that your fingers never go near the knives). Wipe in a downward action
only so that neither the cloth nor your fingers can come into contact with the cutting edge of
the knives
Service H-1