HOFFEN SI-2098, Инструкция по эксплуатации

Страница: 20 / 32

20
31 . Pay attention to the water level in the tank . Too much water in the tank may cause it to
overflow during ironing. Too little water may prevent you from working with a steam
boost .
32 . Do not touch the soleplate of the iron during or immediately after ironing as it is hot .
33 . Do not wrap the power cord around the iron or the base until the iron is completely
cold .
34 . Do not attempt to disassemble any part of the device . There are no repair parts
inside the iron .
35 . Burns may be caused by contact with hot parts of the iron, steam and hot water . Hot
water may be in the water tank and leak out when the iron is turned upside down .
36 . Do not open the water filler lid while ironing.
37 . Keep the instructions and, if possible, the packaging .
38 . If the device is passed on to other people, make sure that these operating instructions
are given with the device .
39 . The electronic version of the manual is available at www .instrukcje .vershold .com