HOFFEN IPL-8110, Инструкция по эксплуатации

Страница: 55 / 60

3
55
Troubleshooting
The device does not turn on Make sure that the device has been correctly
connected to a mains outlet and the plug fits
snugly in the socket.
No light pulses are emitted after
pressing the release mechanism
Make sure that the surface of the contact
sensor entirely touches the skin and that the
"ON / OFF / READY" switch is flashing; the
flashing LED means that the device is in full
contact with the skin.
If after 10 seconds the „READY” LED is still on,
turn the IPL device off and on again by pres-
sing the button twice.
If the problem persists, please contact the
vendor, exchange your product or a new one
or return it.
" ON / OFF / READY " switch LED
turned on as ready and is flashing
The device switched into safety mode becau-
se it detected overheating or a critical issue
(faulty fan, capacitor problem etc.). In such
circumstances, turn off the device and let it
cool for 15 minutes before turning it back on.
If the problem persists, please contact the
vendor, exchange your product for a new one
or return it.
" ON / OFF / READY " switch LED is
flashing green then red
The power adapter to which the IPL device is
connected is not the power adapter supplied
with the set or it is malfunctioning.
If the problem persists despite using the origi-
nal adapter included with the set, contact the
vendor, exchange your product for a new one
or return it.
" ON / OFF / READY " switch LED
lights up in red
The device has reached the end of its lifecycle.