HOFFEN FENK-H100, Инструкция по эксплуатации

Страница: 32 / 52

EN
[32]
STEAM IRON
wires inside the appliance may have become
loose. Discontinue use if the case around
the appliance becomes broken, wires are
exposed or if it presents water leaking.
• Periodically check the supply cord for any
damages. If the supply cord is damaged, it
must be replaced by manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
• Do not place any objects on top of the supply
cord, never bend or twist it, and make sure it
does not come into contact with hot surfaces,
sharp edges, or where people may walk past
and trip over.
• Do not let the power cord hang over so that it
can be accidentally walked on or pulled.
• Do wrap the supply cord around the appliance
to store it, unless the appliance has cooled
down completely.
• Unplug the appliance from the power supply
by pulling the plug and not the supply cord.
• This appliance is not designed to be operated
by programmers, external timers or remote
control systems.
• If it is necessary to use an extension cord, make
sure it has a minimum of 16 Amps. Extensions
with less amperage can overheat.