HOFFEN FENK-H100, Инструкция по эксплуатации

Страница: 44 / 52

EN
[44]
STEAM IRON
steam) and place the iron in the vertical resting position.
Warning: never use vinegar or other liquid cleaning products to remove
calcium from the water deposit (K).
• When the pilot light (J) goes out, hold the iron over the sink and slide the
steam knob (C) to the CALC CLEAN (Self-cleaning) position with a little
force. Steam and boiling water will start to come out of the holes of the
base (L), while the impurities and limestone will be washed away.
• Release the button as soon as the water in the tank (K) runs out.
TIPS FOR A PERFECT IRONING
• Before ironing, read the garment labels and follow the manufacturers’
instructions, usually displayed with symbols, such as:
Do not iron Ironing
Ironing at a
maximum
temperature
of
102º
Ironing at a
maximum
temperature
of
121º
Ironing at a
maximum
temperature
of
172º
• Sort out the clothes to be ironed according with the fabric type. This
will minimize the frequency of temperature adjustment for the different
fabrics.
• If the cloth material and the correct temperature to iron are unknown, it
is recommended to test ironing on a small part on the reverse side. Start
with a low temperature and increase gradually.
• For delicate fabrics such as silk, wool, velvet, etc. it is recommended to
iron the cloth’s reverse side or use a cloth between the fabric and the iron,
to prevent shinny patches.
• It is recommended the use of low temperatures in clothes with unusual
finishes (sequins, embroidery, plush, etc.).
• If the fabric is a mixture of several fibres (for example 40% cotton and
60% synthetic), place the temperature seletor button (G) to a lower
temperature level.
• Never iron fabrics with stains since the heat of the appliance marks the
stains on the fabric, making them difficult to remove.