• Glue a front side part R1 to the rear side part R2L.
• Glue a front side part R1 to the rear side part R2R
Note
: The difference between the two sides is that the right side opening for the pushrod cable is wider
than the left.
•
Caution
: It is important to have a
left
and a
right
component for the construction of the fuselage.
• Glue the fuselage doubler R3 exactly flush to the side part R1 / R2.
• Glue the lower doubler R4 to the bottom edge exactly flush with the side part R1 / R2.
• Glue the upper doubler R5 at the top edge exactly flush to the side part R1 / R2.
Note
. When using white glue, allow all components to complete cure.
Secure the needles and or weights. Spend the time now to be precise, and less work will be required later.
In
no
va
tio
n
As
se
m
bl
y
M
an
ua
l (
EN
) V
9
