• Glue the bottom of the fuselage R15 to R20 starting from the end of the fuselage and secure with needles.
Note
: Make sure that the boom is straight.
The last piece R15 must be trimmed to fit.
• Feed the guide tubes R21 and check for smooth operation of the pushrod cables R22.
If necessary
, slightly enlarge the openings in the sides of the fuse using a 2mm drill bit.
File opening at angle to fit tube. Secure the guide tubes with epoxy.
After curing, cut the guide tubes flush with the sides.
Note
: The guide tubes run crosswise
behind
R12.
• Glue the rear fuselage cover R23 to R26 starting from the frame R11.
Caution
: Be careful to not twist the boom while glueing.
In
no
va
tio
n
As
se
m
bl
y
M
an
ua
l (
EN
) V
9
