RTF/BNF Basic
Carbon Cub S+ 1.3M
EN
11
WARNING:
Do not perform this or any other
equipment test with the propeller installed on the
aircraft. Serious injury or property damage could result
from the motor starting inadvertently.
If performing the control direction test indoors, disable
GPS as shown in the
Deactivating GPS (page 22)
before
performing the control direction test.
Set the SAFE Plus fl ight mode switch to
Experienced
mode
(position 2).
Keep the throttle at zero and place the model on level
ground away from obstacles.
Move the sticks on the transmitter as described in the
table to ensure the aircraft control surfaces respond as
shown.
If the control surfaces do not respond as shown,
DO NOT
FLY.
Refer to the
Troubleshooting Guide
for more informa-
tion. If you need more assistance, contact the appropriate
Horizon Hobby Product Support department.
If the aircraft responds as shown, continue on to the Flight
Control section.
Control Direction Test
Transmitter command
Control Surface Response
Elev
ator
Aileron
Rudder
