WWW.HOBBYEAGLE.COM 8 / 15
Setup Menu Table
(
*
is the default setting)
Functions
LED Status
Solid
Red
Solid
Green
Solid
Blue
Solid
Yellow
Solid
White
Solid
Violet
1
Wing Type
White, 1 flash
Standard
*
Delta-wing
V-Tail
2
Mount Orientation
White, 2 flashes
Flat
*
Flat
Inverted
Upright
Upright
Inverted
3
Flight Mode
White, 3 flashes
1
Position-1
Blue, 1 flash
OFF
*
NORMAL
LOCK
ANGLE
LEVEL
HOVER
2
Position-2
Blue, 2 flashes
OFF
NORMAL
*
LOCK
ANGLE
LEVEL
HOVER
3
Position-3
Blue, 3 flashes
OFF
NORMAL
LOCK
ANGLE
LEVEL
*
HOVER
4
Gyro Direction
White, 4 flashes
1
Aileron
Blue, 1 flash
Normal
*
Reversed
2
Elevator
Blue, 2 flashes
Normal
*
Reversed
3
Rudder
Blue, 3 flashes
Normal
*
Reversed
5
Level Calibration
White, 5 flashes
6
Hover Calibration
White, 6 flashes
7
Maximum Angle
White, 7 flashes
±
30
°
±
60
°
*
±
90
°
8
Servo Frequency
White, 8 flashes
50Hz
*
65Hz
165Hz
200Hz
270Hz
333Hz
9
Gain Level
White, 9 flashes
Small
Medium
*
Large
10 Factory Reset
White, 10 flashes
1. Wing Type
A3 Pro V2 supports standard fixed-wing, flying-wing (delta-
wing) and V-tail. After entering in this function, the color of
LED shows you the wing type currently selected. The
default setting is Standard (Red), each short press of the
button will switch to the next type. After you finish making
your selection, just wait for 5 seconds until LED starts blink
quickly which indicates that the modified is saved and then
you will be brought back to the
Setup Menu
level automatically. If you do not want to change anything,
just wait for timeout without any operation.
NOTES
Make sure that there are no mixing functions active on your transmitter. Have a look at the
radio’s servo monitor and verify that each stick controls only one output channel.
If two aileron servos are being used, please connect a Y-extended lead to [OUT1].
Most flying-wings have no rudder, in this case, [RUD] is unnecessary to connect.
LED Color
Description
Solid Red
Standard (default)
Solid Green
Flying-wing (Delta-wing)
Solid Blue
V-Tail
