WWW.HOBBYEAGLE.COM 4 / 15
your radio transmits the channels in the correct order. If this is not the case, you have to change the
channel mapping in the
Receiver Menu
. If you use a standard PWM receiver with standard wiring layout
the channel mapping does not apply. When A3 Pro V2 is operating in single line receiver mode, the [THR
Out/AIL] can be used as the throttle output channel for the ESC or the throttle servo if a mini receiver is
being used which has no additional output connectors.
Serial Receiver Protocols Supported:
Default Channel Mapping
PPM Receiver
Futaba S.Bus (compatible with FrSky SBUS, RadioLink
SBUS and WFLY WBUS)
Spektrum DSM/DSMX 1024 Satellite Receiver
Spektrum DSM/DSMX 2048 Satellite Receiver
Spektrum SRXL
Multiplex SRXL / JR XBUS Mode B
Graupner SUMD
FlySky iBus
NOTES
Please note that the remote master gain channel is disabled in single line mode as default.
Assign a channel number for gain channel in
Receiver Menu
to activate this feature if needed.
Pay attention to the polarity of the plugs. The orange signal line must always be on the top and
the brown on the bottom.
You will need to purchase an optional adapter if you are using a Spektrum satellite receiver.
Function
Channel Assignment
Aileron
Channel 1
Elevator
Channel 2
Throttle
Channel 3
Rudder
Channel 4
Flight Mode
Channel 5
Master Gain
None
