WWW.HOBBYEAGLE.COM 13 / 15
the
Setup Menu
level automatically.
If you do not want to change anything, just wait for timeout without any operation.
10. Factory Reset
This function is used to reset the gyro to factory settings. After entering in this function, the LED will
remain flashing Blue, press and hold the button for about 2 seconds until the LED starts flash Blue quickly,
release the button to confirm the reset. You will be brought back to the
Setup Menu
level automatically
after the restore is done.
Receiver Menu
Menu ACCESSING
To get into the
Receiver Menu
, press and hold
the button while turn on the power supply of the
gyro, release it when LED lights solid Violet. In
Receiver Menu
you can change the receiver
type and program the channel mapping for
single line receivers.
Function Selection
In the
Receiver Menu
, LED will flash Violet several times every 3 seconds in a loop and the number of
times LED flashes shows at which function item you are currently. For example, one Violet flashing means
the first setting “Receiver Type”, after waiting about 3 seconds, a twice Violet flashing means the second
setting “Aileron channel”, and so on.
Option Switching
When you reach the function that you wish to operate in, short press the button to get into it. After entering
in, the current selected option is indicated by the color of the LED. Each short press of the button
advances the option to the next value. After you finish making your selection, just wait for 5 seconds until
LED starts blink quickly which indicates that the modified is saved and then you will be brought back to
the
Receiver Menu
level automatically. If you do not want to change anything, just wait for timeout without
any operation.
Exit of Menu
To exit the menu just keep the button pressed for 2 seconds again until the LED starts flashing Violet
quickly. After exiting the
Receiver Menu
, the gyro will start the initialization normally, so the new receiver
settings will take effect immediately without restarting the gyro.
