WWW.HOBBYEAGLE.COM 7 / 15
The [Serial RX/G] is used to control the master gain remotely. You can make a linear adjustment by using
a volume or slide lever on your transmitter or make a 3-level gain selection using a 3-position switch. This
function is optional, the master gain will always default to 100% if you do not connect it.
SETTING METHOD
There are 2 menus provided for setting up the gyro which can be accessed by the following ways:
Setup Menu:
When the gyro is working, press and hold the button for 2 seconds, release the button when LED
starts flashing White quickly.
Receiver Menu:
Turn the gyro on while holding down the button, release the button when LED lights Violet.
Setup Menu
Menu Accessing
To get into the
Setup Menu
, press and hold the
button for about 2 seconds until the LED starts
flashing White quickly. The
Setup Menu
contains
10 setting functions which normally only need to
be setup once after installation.
Function Selection
In the
Setup Menu
, the LED will flash White several times every 3 seconds in a loop and the number of
times LED flashes shows at which function item you are currently. For example, one White flashing means
the first setting “Wing Type”, after waiting about 3 seconds, a twice White flashing means the second
setting “Mount Orientation”, and so on.
Option Switching
When you reach the function that you wish to operate in, short press the button to get into it. After entering
in, the current selected option is indicated by the color of the LED. Each short press of the button
advances the option to the next value. After you finish making your selection, just wait for 5 seconds until
the LED starts blink quickly which indicates that the modified is saved and then you will be brought back
to the
Setup Menu
level automatically. If you do not want to change anything, just wait for timeout without
any operation.
Exit of Menu
To exit the menu keep the button pressed for 2 seconds again until the LED starts flashing White quickly.
