Hobby Siesta Скачать руководство пользователя страница 176

Страница: 176 / 229

10. Built-in devices 175

• Turn the energy selector switch to battery operation

• 12V operation will only function if the vehicle’s motor is

running.

• The refrigerator runs without a thermostatic control (con

tinuous operation). 12 V operation should, therefore, only
serve to maintain a temperature which has already been
achieved.

• To turn the refrigerator off turn the energy selector switch

to the O position

230 V operation

• Turn the energy selector switch to mains

• Use the thermostat

to regulate the temperature. No

absolute temperature values have been assigned to the
temperature levels.

• To turn the refrigerator off turn the energy selector switch

to the O position

Gas operation

• Turn the energy selector switch to gas operation

• Open the main stop valve on the gas cylinder and the

“Refrigerator” gas stop valve.

•

Turn the thermostat

up full and keep it pressed down.

The refrigerator will ignite by pressing the button for manual
ignition

• If gas operation has been activated, then the indicator

in the control window will move into the green zone

(model-specific).

Only release the button when the the indicator is in the

green zone.

• Use the thermostat

to regulate the cooling capacity.

No absolute temperature values have been assigned to
the temperature levels.

• To turn the refrigerator off turn the energy selector switch

to the O position

• Close the main stop valve on the gas cylinder and the

“Refrigerator” gas stop valve.

It is not permitted to operate the refrigerator with gas

- at petrol stations

- while driving

- while the vehicle is being transported by means of a transport

or towing vehicle.

This may cause a fire.

• Food should always be stored in closed containers,

aluminium foil or similar materials.

• Never store heated food in the refrigerator; always let it
cool off first.

Storing food

Содержание Siesta






































































































































































































































Результаты поиска

Содержание Siesta

Отзывы:

Похожие инструкции для Siesta

Бренды по названию

Популярные бренды

Hobby Siesta, Инструкция по эксплуатации

Результаты поиска

Содержание Siesta

Отзывы:

Похожие инструкции для Siesta

Бренды по названию

Популярные бренды