4) Attach the Computer
Connect the Computer wire (55), hand pulse wire 3 (60) to the wire that comes from the
Computer (19). Attach the Computer (19) to the top of Front upright tube (11). (Refer figure 4)
5) Attach the Seat Cushion Frame
Attach the Seat cushion frame (3) to the Seat cushion adjustor (2)
with four M8×20 Bolts (42),4 pcs ofΦ8 Flat washers (37), and 4
pcs of M8 Nylon nuts (56). (Refer figure 5)
6) Attach the Seat Cushion and Back Cushion
Attach the Seat cushion (12) and Back cushion (13) to the Seat cushion frame (3) with eight pcs of M8×40 Bolts (43) and 8 pcs
ofΦ8 Flat washers (37). (Refer figure 6)
7) Attach the Left and Right Handlebar Tubes
a. Connect the hand pulse wire 1 & 2 (58/59) with hand pulse wire 3(60), fix the Left and right handle bar (8/9) with 4 pcs of Half
round Crosshead bolt M8×20(42), 4 pcs of Φ8 Arc washer (33) ( See figure 7).
