LED Indicators
30
Doc.ID. HMSI-168-92
Netbiter EasyConnect
Doc.Rev. 2.10
SIGNAL STRENGTH
1 Green Flash: Weak Signal.
The signal strength is too weak. Make sure the antenna is correctly mounted and pointing upwards. Use
another external antenna, or try relocating the antenna using extension cables.
2 Green Flashes: Medium Signal Strength.
The unit will function, but a stronger signal is recommended. Try experimenting with antenna placement
to improve reception.
3 Green Flashes: Good Signal.
This indicates an optimal setup.
5.3.2 Serial Status LED
The Serial Status LED indicates ongoing serial communication through the serial ports. This includes
data traffic for RS-232, RS-422, RS-485, and GPRS traffic (modem).
Red flash: Transmitting serial packet.
Green flash: Receiving serial packet.
Orange: During boot up.
5.3.3 Ethernet Activity/Collision LED
The Ethernet Activity LED indicates network traffic.
Green flash: Receiving Ethernet packet.
5.3.4 Ethernet Link LED
Off: No Ethernet link detected.
Steady green: 10 Mbps Ethernet network detected.
Steady orange: 100 Mbps Ethernet network detected.
