HMS M0488, Инструкция по эксплуатации

Страница: 12 / 25

STEP 4. ATTACHING THE SADDLE.
4. Loosen and remove all the fixings from the saddle (8).
5. Attach the saddle (8) to the saddle post (11) and fasten using the fixings
previously removed [three flat washers M8 (9) and three nuts M8 (10)].
6. Use the multi-functional spanner (provided) to tighten the nuts.
STEP 5. ASSEMBLING THE SADDLE POST.
4. Insert the saddle post (11) into the tube on the main unit (14).
5. Adjust the saddle height according to your preference.
6. Guide and screw the adjustment knob (13) through the opening on the
tube and the saddle post (11).
Caution! The saddle post (11) should
not directly rest on the adjustment knob
(13). Risk of damage and/or injuries!
STEP 6. ATTACHING THE FRONT HANDLE POST.
7. Remove the fixings at the bottom of the
front handle post (31).
8. Set the tension control knob (32) to
position 1 to release the tension cable (25)
and simplify the procedure.
9. Place the front handle post (31) close to
the tube on the main unit (14) and connect
the upper computer wire (27) to the lower
computer wire (26).
10. Now, connect the tension cable (25) to the
tension hook (24).
11. Attach the front handle post (31) to the
tube on the main unit (14) and fasten using
fixings previously removed [three bolts M8x20 (28), three spring washers M8 (29) and three curved washers M8 (30)].
12. Use the provided allen key to tighten the bolts.
Caution! Make sure not to pinch the computer wire between the tubes. Risk of damage!