HMS M0488, Инструкция по эксплуатации

Страница: 13 / 25

STEP 7. ATTACHING THE FRONT HANDLE.
5. Remove the upper fixings from the front handle post (31).
6. Guide the pulse sensor cables (4) throughout the
opening on the front handle post (31).
7. Attach the front handle (2) to the front handle post (31)
and fasten using fixings [two bolts M8x20 (7), two spring
washers M8 (6) and two curved washers M8 (5)]
8. Use the allen key (provided) to tighten the bolts.
Caution! Make sure not to pinch the pulse wire between the
tubes. Risk of damage!
STEP 8. ATTACHING THE COMPUTER
5. Loosen the two bolts M5x10 (33) from the backside of the computer (1).
6. Connect the pulse sensor wires (4) and upper computer wire (27)
coming out of the handle post (31) with the corresponding cables on the
computer.
7. Attach computer (1) to the handle post (31) and fasten using two bolts
previously removed M5x12 (33).
8. Use the multi-functional spanner (provided) to tighten the bolts.
Caution! Make sure that none of the wires gets caught in between two
surfaces. Risk of damage!
STEP 9. STABILIZING THE BIKE.
If the product is unstable you can reduce or eliminate the tilting by turning the rear
stabilizer (18) caps.
COMPUTER