Intesis
TM
INMBSPAN001A000
User’s Manual r1.
3 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
5 / 22
INMBSPAN001A000
INMBSPAN001A000
INMBSPAN001A000
1.
Presentation
The INMBSPAN001A000 interface allows a complete and natural integration of
Panasonic Air-to-Water Systems
into Modbus RTU (EIA-485) networks.
Compatible with Aquarea H models from Panasonic
Reduced dimensions. 93 x 53 x 58 mm.
3.7”
x
2.1”
x
2.3”
•
Quick and easy installation.
Mountable on DIN rail, wall, or even inside the Hydro unit.
•
External power not required.
•
Direct connection to Modbus RTU (EIA-485) networks. Up to 63 INMBSPAN001A000 devices
can be connected in the same network.
INMBSPAN001A000 is a Modbus slave device.
•
Direct connection to the Hydro unit. Up to 1 Hydro unit can be connected to
INMBSPAN001A000.
The cable for this connection is also supplied.
•
Configuration from both on-board DIP-switches and Modbus RTU.
•
Total Control and Supervision.
•
Real states of the Hydro unit's internal variables.
•
Allows simultaneous use of the remote controls of the Hydro unit and Modbus RTU.
*Up to 63 Intesis devices can be installed in the same Modbus RTU bus. However, depending on the configured speed, the installation of
Modbus Repeaters may be required.
Up to 63
Hydro
units*
Modbus RTU
EIA-485 network
Modbus
RTU
Master
device
•
SCADA
•
PLC
•
DDC
•
BMS
•
HMI
•
Controller
•
etc
