ASSEMBLY INSTRUCTION
1). Install the Rear Stabilizer
Attach the Rear stabilizer (3) to the Main frame (1) with two sets of
M8×20 Bolts (83), Φ10
spring washers (98), washer (91) and nut (84). (Ref. figure 1)
2). Install the Front Stabilizer
Attach the Front stabilizer (2) to the Main Frame (1) with two sets of
M10×70 Bolts (83), Φ10
spring washers (98),
Φ10 Flat washers (91) and M10 nuts (84). (Ref. figure 2)
3). Install the Front Upright Frame
a. Put the end of resistance cable (21) into the spring hook of Tension control wire (12) as
shown on drawing
A
of figure 3
b. Pull the resistance cable up and force it into the gap of metal bracket of Tension control wire
(12) as shown on drawing
B
of figure3
c. Connect the resistance cable with the Tension control wire (12) completed as shown on
drawing
C
of figure 3
Connect the computer wire (26) to the Sensor wire (25) coming out from main frame (1). Insert
the Front upright frame (14) to the main frame (1) and secure it with six pcs of Bolts (38),
ф
8
Spring washers (51), and Arc washers (45) as shown on drawing
D
of figure 3.
Содержание H9244
Страница 1: ...H9244 INSTRUKCJA U YTKOWANIA MANUAL INSTRUCTION N VOD K OBSLUZE...
Страница 5: ...NARZ DZIA 91 10 Podk adka 4pcs...
Страница 18: ...TOOLS...
Страница 37: ......
