HMS FRC-EP170, Руководство по оборудованию

Страница: 8 / 22

Connections
Copyright HMS Technology Center
Ravensburg GmbH
8
FRC-EP170 Manual, Version 1.3
LED 1 is implemented as a power LED and indicates the device status.
Status Description
"off" The FRC-EP170 is not supplied with power (pin 1, power connector)
"Flashing
green" The FRC-EP170 is in hibernate mode and waits for a waking condition that
can be configured via the software.
"Red" The FRC-EP170 is in boot mode and the operating system is starting.
"green" The FRC-EP170 has ended boot mode. Applications can be started or are
being started.
Table 2-3: Power LED display description
The notification of LEDs 2 through 8 can be configured via the software and
are therefore application-dependent. Please see their functionality in the
specific software manual or the software's online help.
2.7 Remote/debug interface (REMOTE)
The function of the remote/debug interface depends on the application
executing. In general, however, there are three application options:

If the software application in use supports remote control, the remote
control provided by IXXAT as an accessory can be connected here.

If the software application in use supports debugging or control functions
via RS232, the cable available from IXXAT as an accessory can be
used to connect to a PC.

If the software application in use supports extended I/O functions,
additional inputs/outputs can be used through this interface.
Please see the exact function of this interface in the specific software manual
or the software's online help.