HMS FRC-EP170, Руководство по оборудованию

Страница: 5 / 22

Connections
Copyright HMS Technology Center
Ravensburg GmbH
5
FRC-EP170 Manual, Version 1.3
2 Connections
The device has user interfaces (Ethernet, USB, SD Card, LEDs, etc.) on the
front side and field bus interfaces (FlexRay, CAN, LIN, etc.) on the back.
The front of the device is equipped with the following connectors.
Figure 2-1: Front of the FRC-EP170
2.1 Power plug (6-36 VDC)
The unit is supplied with a DC voltage from 6 V to 36 V. The power supply
input is protected against polarity reversal and against overvoltage.
Pin Signal Description
1 +VDC Power supply v
2 - (GND) Power supply ground
3 KL15 Digital input clamp 15
Table 2-1: Pinouts of the 6-36 VDC power plug
Please use the power supply cable provided with the device. This cable is also
available separately as an accessory.