Reset Via the Built-In Web Interface
Launch the built-in web interface > On the System Settings page, click Factory Restore.
Reset Using Easy Config
To reset Bolt Serial to factory default, execute Easy Config Mode 2.
Activate an Easy Config Mode in the Built-In Web Interface
.
Reset Using AT Command
To reset Bolt Serial to factory default, issue the AT command AT&F and then restart the
unit.
Configuration with AT Commands (page 17)
.
Reset Using Digital Input
To reset Bolt Serial to factory default, apply voltage to the digital input for >10 seconds.
Anybus
®
Wireless Bolt Serial
™
Reset to Factory Default
Page 22 of 28
SP2554 2.0
