6.2. Recovery Mode
If the built-in web interface cannot be accessed, the unit can be reset by starting in
Recovery Mode and reinstalling the firmware.
Before You Begin
IMPORTANT
Use Recovery Mode only when the unit is unresponsive and the built-in
web interface cannot be accessed. Firmware updates should normally be
carried out through the built-in web interface.
Procedure
To enter Recovery Mode
1.
Press and hold MODE button during startup.
Figure 9. RESET button
2.
Bolt Serial enters Recovery Mode.
To Reinstall the Firmware
1.
To reinstalling the firmware, you need Anybus Firmware Manager II.
Download Anybus Firmware Manager II from
.
2.
Install Anybus Firmware Manager II on your PC.
3.
Launch Anybus Firmware Manager II and follow the instructions to reinstall the
firmware.
Recovery Mode
Anybus
®
Wireless Bolt Serial
™
SP2554 2.0
Page 23 of 28
