4 (32)
2
Safety
Connecting power with reverse polarity or using the wrong type of power supply may
damage the equipment. Make sure that the power supply is connected correctly and of
the recommended type.
This product contains parts that can be damaged by electrostatic discharge (ESD). Use
ESD prevention measures to avoid damage.
The Modbus to KNX Gateway should only be installed by adequately trained personnel and
according to applicable safety regulations.
The unit should be mounted on a standard DIN rail or screw-mounted onto a flat surface inside a
properly grounded metallic enclosure. The unit should not be mounted outdoors or exposed to
direct sunlight, water, high humidity or dust.
Make sure that you have all the necessary information about the capabilities and restrictions of
your local network environment before installation.
Modbus to KNX Gateway User Manual
SCM-1202-050 1.2 en-US
