12 (32)
4.2
Mechanical Installation
The unit should be mounted on a standard DIN rail or screw-mounted onto a flat surface inside a
properly grounded metallic enclosure. The unit should not be mounted outdoors or exposed to
direct sunlight, water, high humidity or dust.
Make sure that there is enough space for the connectors and that the LED indicators and
configuration switches are accessible after the unit is mounted.
DIN Rail Mount
Fig. 3
DIN rail mounting option
Mounting
1.
Hook the unit onto the upper lip of the rail.
2.
Press the unit gently towards the rail until it snaps into place.
Removing
1.
Pull the tab at the bottom of the unit gently downwards.
2.
Pull the bottom end free and lift the unit from the rail.
Wall Mount
Fig. 4
Wall mounting option
Push the three mounting clips on the back of the unit from the original position to the outer
position. A click indicates when the clip is locked in the outer position.
The holes in the mounting clips can now be used for screw mounting.
Modbus to KNX Gateway User Manual
SCM-1202-050 1.2 en-US