Anybus Configuration Manager (MAPS)
28 (32)
5.6
Diagnostic Tab
The Diagnostic view can be used for analysis and troubleshooting when building and
implementing configuration projects. Multiple
Viewers
can be added to the interface to monitor
communication on the protocols as well as general gateway information.
Fig. 21
Diagnostic tab
5.6.1
ToolBox
The ToolBox is located on the left side of the Diagnostic view.
Hardware Test
Initiates a hardware test on the gateway to identify possible hardware issues. During the hardware
test normal communication with the protocols will stop.
Log
Records all information present in all viewers and saves it to a zip archive. This file can then be sent
to Anybus support to assist troubleshooting.
Commands
Can be used to send specific commands to the gateway:
INFO?
Requests general information from the gateway.
RESET
Resets the gateway.
Enable COMMS
Enables communication in all viewers.
Disable COMMS
Disables communication in all viewers.
Panel Distribution
Preset window layouts for the Diagnostic view. The viewers can then be moved as required.
Modbus to KNX Gateway User Manual
SCM-1202-050 1.2 en-US
