HMS Networks Ixxat CANnector Log, Руководство пользователя

Страница: 9 / 38

Installation 7 (36)
5 Installation
5.1 Installing the Software
To connect the CANnector Log to a PC via USB a driver is needed. With installation of the
configuration tool ACT the driver is automatically installed.
The ACT tool can be downloaded on www.ixxat.com .
►
On www.ixxat.com/technical-support/support select Advanced Configuration Tool and
open Secured Downloads
► Download the ACT tool ZIP container from the support area.
To be able to download the ACT, a valid e-mail address must be submitted.
► Unpack the ZIP container in a user defined folder on the local drive.
► Execute the included installation file Ixxat ACT Setup w.x.yyy.z CM.exe .
→ ACT setup assistant is started.
► Follow instructions in ACT setup assistant.
→ When installation is finished, ACT and IxAdmin are installed.
→ Required USB driver for configuration is installed.
5.2 Installing the Hardware
The device can be installed on a grounded 35 mm DIN rail or used with the adhesive feet on an
even surface.
5.2.1 Installing on DIN Rail
Fig. 1 Installing on din rail
► Hook the din rail clip onto the upper lip of the rail and push the device downwards ( 1 ).
► Push the device towards the rail until it snaps into place ( 2 ).
► Make sure, that the venting slots are not covered and ensure adequate air circulation
(recommended mounting distance: 2 cm distance to venting slots).
CANnector Log User Manual
4.01.0091.21000 1.1 en-US