HKS 45003-AK005, Инструкция по эксплуатации

Страница: 26 / 52

−25−
Post Installation Checks
Advice
・Do not raise the engine RPM right after staring engine. (Let it idle)
Checked
Checked Items to check
Make sure all hoses are routed and connected correctly.
Make sure all hoses do not have too much slack.
Make sure all hoses are not damaged.
Make sure all hose clamps are secure and tight
Make sure all bolts and nuts are properly tightend.
Make sure hoses, harnesses & installed components do not contact other parts.
Make sure hoses and harnesses are secured properly.
Make sure wiring is done correctly.
Make sure all connectors and splices are connected securely.
Make sure all splices are the included ones and stalked properly.
Make sure the unit or components are mounted securely and dont disturb driving.
Make sure the negative cable terminal is securely attached to the battery.
Make sure the boost control solenoid valve is bypassed.
Check the following after the installation processs is complete.
1. Check the following BEFORE starting the engine
2. Check the following AFTER starting the engine
Items to check
Make sure there is no air leakage.
Make sure there is no air leakage after revving the engine in neutral 2‑3 times.
Make sure installed parts are not in contact with each other.
Make sure there is no excessive stress on hoses or harnesses.
Make sure there are no parts that have loosened after stopping the engine.
www.R33-GTR.org