Hkoenig STM45, Инструкция по эксплуатации

Страница: 5 / 71

Do abide by the following for the safety of yourself and others.
Notices
Plug the power plug in thoroughly to
avoid electric shock, as well as open
circuit, short circuit, smoking and
flammation caused by over-heat of plug. Use the socket with rated voltage of
220V-250V separately from other
electric appliances, otherwise, fire
may occur due to heat.
No watering: danger of short circuit and
electric shock. Do not pull or plug the plug with wet
hand in respect of electric shock.
Do not use broken or loose socket in
respect of electric shock, short circuit
and flammation. Keep away from the steam hole to
avoid burn.
Do not intend to refit, remove or repair
the product in respect of fire, electric
shock or other injuries. Keep it away from the children or
others unable to operate.
Do not insert the metal needle into heat
dissipation hole or clearance in respect
of injury caused by electric shock. Remove the dust on power plug at
regular intervals, otherwise, fire
accident may occur due to poor
insulation.
Do not put the product in water or
damp environment or close to other
heat sources, and do not put the inner
boiler on the naked fire. Do not touch the hot part, especially
the surface of steam jet of ironing
brush during or after the operation.
Hold the plug rather than haul the
power cord to pull out the power plug. Do use the attached power cord
which shall not be used for other
equipment.
Do not operate on the unstable platform
or cushions which could not receive heat
in respect of injury or fire caused by
fallen ironing brush. If not in use, pull the power plug out
of the socket to avoid electric shock,
creepage and fire arising from
damages and insulation ageing.
Wash the ironing brush after totally
cooling down to avoid scald. Do not put it close to wall or
furniture in case the steam leads to
color change or distortion of which.
Keep it over 30cm away from the
wall and furniture.