Hkoenig STM45, Инструкция по эксплуатации

Страница: 4 / 71

*
Do not drag the steam conduit by force or to move the machine, or the steam conduit may
be damaged or steam may leak.
*
Do not pull out or plug in the steam conduit when the machine is still hot but only when the
machine is cooled down, thus to avoid scald.
*
If the ironing brush falls, has visible damage or is leaking, stop using it.
*
To avoid scald by steam, after operation, turn off the power supply, pull out the plug and,
when the machine is cooled down, pour out the remnant water, and then have the machine
packed and stored. However, let the machine air dried before packing and storage. Do not
pull put the plug by dragging the power cord.
*
Use dry soft cloth and neutral detergent to clean the machine surface and do not use
solvents such as gasoline, alcohol, banana oil, etc. Prevent liquids penetrating into the
machine.
*
Do not soak the machine, power cord or plug in water or other solutions. Do not keep the
machine in places which are damp, exposed or of corrosive gases.
*
Keep the machine away from flammable or explosive objects.
*
Please clean the filter sieve at regular intervals to keep it available. The machine shall be
cleaned or maintained from time to time (every 1 month or 20L water is consumed). (See the
following sections for the cleaning and maintenance)
*
Push the support pole to move the machine. Do not move the machine by force when it is
tough to be moved. Discharge the water before checking the wheels. Turn off the power
supply and pull out the plug before moving the machine.
*
Turn off the power supply and pull out the plug before discharging water from or filling water
in the tank. Avoid water leakage. Do not open or take down the tank in use.
*
If find any damage on the accessories especially the safe protection and power cord, stop
using the machine and inform our professional personnel of service center for repair. Do not
repair at your own discretion.
*
Before cleaning or repairing the machine, turn off the power supply, pull out the plug,
release the pressure inside the heating element of the base and let the machine cool down.
*
This device is not intended for use by persons with reduced capacity on the physical, mental
or sensory or lack of experience and knowledge (including children), unless he has them was
asked to monitor or if they have had instructions on the use of the appliance by a person
responsible for their safety. Children should be supervised to ensure they do not play with the
device.