Assembly instructions
Basic safety information
HIWIN MAGIC Distance Measuring Systems
MAGIC-01-14-EN-2207-MA
Page
7
of
32
2
Basic safety information
Warning
! Danger due to strong magnetic fields!
This chapter is for the safety of everyone who works with, assembles, installs, operates,
maintains or disassembles the distance measuring systems. Failure to comply with the
following information could be dangerous!
2.1
Proper use
HIWIN MAGIC is a magnetic distance measuring system for positioning tasks with linear
movement within an automated system. It is mainly used in linear motors. The named distance
measuring systems must not be used outdoors or in hazardous areas where there is a risk of
explosions.
The distance measuring systems may only be used as described for the intended purpose.
2.2
Exclusion of liability in the event of alteration and improper
handling
No changes whatsoever may be made to the distance measuring systems that are not
described in these assembly instructions. If a modified design is necessary, please contact the
manufacturer.
The manufacturer accepts no liability in the event of modifications or improper assembly,
installation, commissioning, operation, maintenance or repair.
Only original HIWIN parts are permitted as spare parts and accessories. Spare parts and
accessories not supplied by HIWIN have not been tested for operation with HIWIN MAGIC
distance measuring systems and may impair operational safety. The manufacturer accepts no
liability for damage caused by the use of non-approved spare parts and accessories.
2.3
Qualified personnel
The distance measuring system may only be installed, integrated into higher-level systems,
commissioned, operated and maintained by competent personnel. A qualified person is one
who
Has suitable technical training
and
Has been instructed by the machine operator in operation and the valid safety guidelines
and can assess the dangers to be expected
and
Has read through these assembly instructions in full and understood them and has access
to the assembly instructions at all times
2.4
General safety instructions
Warning
! Danger of serious or fatal injuries!
Before and during all assembly, disassembly or repair work, the distance measuring
system or the higher-level system must be de-energised and it must be ensured that the
mains connection cannot be re-established by other persons!
The distance measuring systems must not be used in potentially explosive atmospheres.
The distance measuring systems may only be used and operated indoors.
