Assembly instructions
Declaration of conformity
HIWIN MAGIC Distance Measuring Systems
MAGIC-01-14-EN-2207-MA
Page
30
of
32
10
Declaration of conformity
According to
EMC Directive 2014/35/EU
Name and address of the manufacturer:
HIWIN MIKROSYSTEM CORP
No.6, Jingke Central Rd.,
Taichung Precision Machinery Park,
Taichung 40852, Taiwan
This declaration refers exclusively to the product in the state in which it is placed on the market
and expressly excludes components added and/or modifications made to the product by the
user at a later date. This declaration is null and void if changes are made to the product without
the express consent of the manufacturer.
We hereby declare that the product described below
:
Product designation
MAGIC Positioning Measurement Systems
Model/Type:
PM-B-xx-xx-x
Year of manufacture
From 2016
Complies with all relevant requirements of EU Directive
2014/30/EU
(EMC/Directive).
In addition, the product complies with the requirements of
Delegated Directive (EU) 2015/863
(Amendment to Annex || of Directive 2011/65/EU RoHS Directive).
Applicable harmonised standards:
EN 61000-6-2
Electromagnetic Compatibility (EMC)
Part 6-2: Basic technical standards
-
Immunity for industrial environments
EN 61000-6-4
Electromagnetic Compatibility (EMC)
Part 6-4: Basic technical standards
-
Emission standard for industrial areas
2005
2007 + A1: 2011
Additional notes:
The product is intended for installation in machinery and therefore does not satisfy the
requirements for a complete machine in the sense of the Machinery Directive. The product may
only be put into service when installed as part of a complete machine that complies in its
entirety with the provisions of the Machinery Directive.
A safety assessment (electrical and/or mechanical) of the product may only be carried out after
installation in a machine for the intended use.
After installation and use as a component of a machine, the product may have an influence on
the EMC properties of this machine. The assessment of the EMC behaviour of the complete
machine must therefore be carried out by its manufacturer or distributor.
