Hiwin LMSSA, Руководство по сборке

Страница: 30 / 44

Contents
Linear motor axis LMSSA LMSSA-01-1-EN-2201-MA Seite 30 von 44
Steps to switch on the linear motor system:

Switch off the controller.

Pull out the motor cable.

Connect positioning measurement system cable (see Section 5.3.2).

Switch on the controller.

Check the positioning measurement system (see separate assembly instructions for the drive and
positioning measurement system).

Switch off the controller.

Connect the motor cable (see Sections 5.3.1).

Switch on the controller.

Perform test run at slow speed.

Perform test under usage conditions.
6.2 Programming
Note:
The programming of the linear motor system depends on the controller and drive used. Observe the user manual
for the controller and drive!