Hiwin LMSSA, Руководство по сборке

Страница: 18 / 44

Contents
Linear motor axis LMSSA LMSSA-01-1-EN-2201-MA Seite 18 von 44
Note:
Electrical equipment is designed to withstand to protect against the effects of transportation, and storage
temperature within a range of -25 °C to +55 °C and for short periods not exceeding 24h at up to +70 °C.
Steps to transport the linear motor system:

Disconnect power supply.

Disconnect stage cables.

Remove the payload.

To transport the linear axis, hoist it at the points designated A and B (Fig. 4.1).

Ensure even load distribution while lifting.
Fig. 4.1: Hoisting and transporting – here for a linear motor system
Fig. 4.2: Hoisting and transporting – Incorrect position of the supporting points
4.3 Requirements at the installation site
4.3.1 Ambient conditions
Area of use For indoor use only
Temperature 0 °C bis 50 °C
Humidity < 80% RH (non-condensing)
Altitude < 1000 m
Installation site Flat, dry, vibration-free
Protection class IP50 and no interference from corrosive solvent or strong magnetic
Grounding Plant power grounding line conforms to international requirements

Avoid exposing to direct sunlight or hear rays.

Away from electric magnetic interference source sites, such as welding, discharge machine.
A
B