HiWeigh X1FM, Руководство пользователя

Страница: 5 / 12

3
switch off function disable
Ones digit=1 means zero when weight is
2 ℅ F · S, and automatic
switch off function enable
Ones digit=2 means zero when weight is
20 ℅ F · S, and automatic
switch off function disable
Ones digit=3 means zero when weight is
20 ℅ F · S, and automatic
switch off function enable
Ones digit=4 means zero when weight is
50 ℅ F · S, and automatic
switch off function disable
Ones digit=5 means zero when weight is
50 ℅ F · S, and automatic
switch off function enable
Tens digit flashes.
Factory default AUtP = 11
7 Press *
Press →
Press ↑
Or → 0 ←
Adr 00 Select address:
Continuous data output , Adr=00 or Adr=99
Communicate is by modbus between 01-95
Factory default Address = 00
8 Press *
Press ↑
Or → 0 ←
b 2400
b 4800
Select baud rate:
1200
→ 2400 → 4800 → 9600
Factory default baud rate = 2400
9 Press * 0 Confirm configuration
§5. Wireless Communicate
After above configuration, set the wireless communicate
Step Operation Displaying Descriptions
1 Press *
Press *
Press *
Press *
Press *
CAL SP
-SEt-
-A-d-
FACT
Con
Indicator in calibration mode
Indicator in configuration mode
Enter ADC counts display
Back to factory set
Set wireless communicate address
2 Press → Con 78 Enter address which is same as wireless weighing transmitter
3 Press * 2300 Back to weight states
4 Press * ConSEA Search wireless communicate address automatically
5 Press → Con xx
Con-78
Search wireless weighing transmitter
When indicator searched wireless weighing transmitter, it will display
the address (go to step 6 or step 7)
6 Press → 2300 Follow step 5, save the address and return to weighing mode
7 Press * 2300 Follow step 5, delete the address and return to weighing mode
§6. Calibration
After above setting, calibrate indicator directly:
Refer to the table of next page >>>