HiWeigh X1FM, Руководство пользователя

Страница: 4 / 12

2
§3. Keypad Function and Status Indicators
ON : Switch on OFF : Switch off
: Manual accumulation mode * : Select function and configure
→ : Move flashing digit ↑ : Increase flashing digit and high resolution
→ 0 ← : Zero, tare and decrease flashing digit
AC : Mains power applied : Battery capacity
AUT : Automatic accumulation mode : Weight stable
→ T ← : Tare mode → 0 ← : Zero mode
lb : lb mode UU : User weighing unit mode
wireless : Wireless connected
§4. Configuration
1. Correct connect load cell – wireless weighing transmitter – wireless weighing indicator
2. Configure as follow step
3. Press * to configure and next step
Step Operation Displaying Descriptions
1 Press → 0 ←
On
000000
999999
0
In switch off states, press → 0 ← key and ON to switch on
indicator. Segment checks, and displays [UE-22.0] to configure and
calibrate
2 Press *
Press *
CAL SP
-SEt-
Indicator in calibration mode
Indicator in configuration mode
Press → d 1 Select
division
3 Press ↑
Or → 0 ←
d 2 0.001-0.002-0.005-10-20-50-100-200-500-0.10-0.20-0.50-1-2
-5-0.1-0.2-0.5-0.01-0.02-0.05
Factory default d = 0.01
4 Press *
Press →
Press ↑
6000
000000
001000
015000
Set full scale
Press
→ to move digit
Press ↑ to increase digit
Press → 0 ← to decrease digit
Factory default FS = 150.00
5 Press *
Press →
Press ↑
Or → 0 ←
FLt 1 Filter range: 0 ~ 2 0-fastest 2-slowest
Digit flashes
Factory default Filter = 2
6 Press *
Press →
Press ↑
Or → 0 ←
AUtP00 Ones digit means automatic switch off function:
Ones digit 0,2,4 means automatic switch off function enable
Ones digit 1,3,5 means automatic switch off function disable
Tens digit means range of zero track (0~9):
0:0.4d 1:0.4d 2:0.8d 3:1.2d 4:1.6d 5:2.0d
6:2.4d 7:2.8d 8:3.2d 9:3.6d
Tens digit also means range of zero:
Tens digit
0 means no zero set at start operation
Tens digit ≥ 1:
Ones digit =0 means zero when weight is 2 ℅ F · S, and automatic