HiWeigh X1FM, Руководство пользователя

Страница: 6 / 12

4
Step Operation Displaying Descriptions
1 Press *
Press →
CAL SP
CAL 00
Indicator in calibration mode
Enter to set ZERO
2 Press * ------
3000
Set ZERO
After several seconds, indicator displays maximum weight
3 Load max weight
Press *
3000 Display weight
4 Press →
Press ↑
Or → 0 ←
000000
002000
If the weight is not the max weight, press → and ↑ or
→ 0 ← to input actually weight
e.g.: weight is 2000
5 Press * ------
2000
Calibrate
After several seconds, indicator displays weight, then finish
calibrate
§7. ADC Counts Display
Confirm load cell connect is correct to check ADC counts. After set the short pin, ADC counts should
around 100000-200000. After above setting, check ADC counts directly:
Step Operation Displaying Descriptions
1 Press * CAL SP Indicator in calibration mode
2 Press * -SEt- Indicator in configuration mode
3 Press * -A -d- ADC counts display
4 Press → 43125 Enter to check ADC counts, and display 43125
5 Press * 0 Return to weighing mode
§8. Factory Set
Step Operation Displaying Descriptions
1 Press * CAL SP Indicator in calibration mode
2 Press * -SEt- Indicator in configuration mode
3 Press * -A -d- Indicator in ADC counts display mode
4 Press * FACt Select Back to factory set
5 Press → 0 Back to factory set and return to weighing mode
Factory default: d=0.01 FS=150.00 FLt=2 AUtP=11 Adr=00 b=2400
§9. Weighing Unit
Step Operation Displaying Descriptions
1 Press *
On
000000
999999
0
Press * and ON to switch on indicator
If it displays [UE=21.X], user can set own unit
2 Press ↑ 2.0000 Select unit
3 Press → 000000 Digit flash
4 Press ↑
→ 0 ←
01.6535 Change digit number
If user unit is Hong Kong kg, enter 1.6535
5 Press * HE 0 Decimal/H
exadecimal
(lb And UU)
0---Decimal
1---
Hexadecimal