HT(HPC)-100CT-2 Series
HITROL CO., LTD. 12
Marking
User
Training
Warranty
and Contact
■
Warranty and Service
This product is subject to the warranty for 2 years of shipment and unpaid service
will be provided for any damage found under normal operating conditions. If it is
not about the failure of product, the service charge will be payable.
You can request A/S at our website or by contacting our headquarters.
■
Headquarters
․
Factory
․
Laboratory Contact Number
ADDRESS: HITROL CO., LTD 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Korea
T E L : 031-950-9700 (Headquarters & A/S)
F A X : 031-943-5600 (Headquarters & A/S)
■
Product Identification
The product identification mark is attached onto the housing and shows the model name,
serial number, working temperature, working pressure, and matters regarding output. The
serial number is a unique manufacturing number for the identification of products.
The fluid temperature of the container shall be up to 80℃ for Weather-proof type. For
high temperature, the fluid temperature shall not exceed 150℃. In addition, make sure
that the ambient temperature of housing is kept at -20℃ ~ +60℃.
An Ex-proof product is pressure-resistant and Ex-proof type, so never open the cover
during operation.
Do not apply the Weather-proof (non-Ex-proof) product in an Ex-proof zone.
Ex-proof
Weather-proof
■
Disposal of Product
- Make sure to separate the amplifier and main unit from housing before
disposing the products. Also, the amplifier shall be detached and discard the
metal and non-metallic materials. No part (ex. Mercury switch) has influence on
the environment, so no special attention is required.
Содержание HPC-100CT-2 Series
