HT(HPC)-100CT-2 Series
HITROL CO., LTD. 11
Precautions
For Removal
Precautions
for
Transportation
& Assembly
Precautions
for
Attachment
Precautions
for
Grounding
(Ex-proof)
Safety and
Environment
■ Pay special attention to prevent any impact on the device during transportation or assembly.
■ Pay attention to prevent any damage to any packing when transporting or mounting
the machine to the vessel.
■ Use the same standard flange or screw.
■ Make sure to insert washers between bolts and nuts to prevent loosening.
■ Make sure to insert gaskets between flanges.
(Select the gaskets in consideration of temperature of content and pressure of vessel.)
■ Install an Ex-proof product only in an Ex-proof zone.
■ After the installation is complete and the cover of the product is assembled, power it on.
Please do not apply high impact to the product.
■
When connecting to an external ground, the ground wire shall be 4㎟(4mmSQ).
■ Check the level and presence of medium in the tank before removing it.
■ Wear gloves when removing it, to prevent a burn.
■ If there is explosive gas atmosphere, do not open the cover.
■ Disassemble work shall be done with the power off.
■ Make sure than any O-ring or gasket is not damaged while opening or closing the cover of product.
HEAD (Weather-proof)
HEAD (Ex-proof)
External ground
4㎟
(4mmSQ)
Make sure to insert a washer if the terminal lug is removed from ground terminal and
then re-connected. (Loosening prevention)
If the grounding part is painted or rusty, it may not be grounded.
■
Precautions for Use
- Make sure to connect the product and vessel using required tools for sure.
- Keep the lock key safe and make sure that it is locked.
- Do not apply high impact to the product.
■
Precautions for Wiring
- Make sure to wire contacts correctly. (Refer to Wiring)
- Wire and supply the power to the device after checking the specifications.
- Pay attention to prevent electric shock.
Содержание HPC-100CT-2 Series
