Page 9
Hardware Installation.
Connect the cigar plug to an appropriate power outlet as described in the
beginning of this document.
Connect a standard USB cable (supplied) to the MHP and plug the computer end
into an available USB 2 or USB 3 port. The device should be automatically
detected and you should receive a windows message
‘Your hardware is installe
d
and ready to use’
.
There is no specific driver required since your MHP uses a standard
driver which is part of windows.
MHP is a USB 2.0 device as is the inbuilt USB hub. However It is
compatible with USB 3.0 ports on your computer.
Now disconnect the power and plug in any dew heaters/equipment and connect
your focuser.
Note: It is not necessary to use all features of the device.
