Page 14
Operating the PC Software.
Your MHP is supplied with PC software which allows you access to all of the
features of the MHP. This software should be installed as described earlier in this
document. The detailed features of the software are described below
Software Layout.
The software is laid out with tabs on the right side which present you with
functionality related to that area such as Focus or Power. You click the tab of
choice to use the functionality you are interested in.
Connect Button
When initially started all of the control buttons on the software are disabled.
Once the unit has been connected correctly, click the connect button. The text in
this control changes to ‘Connected’ and all of the controls are enabled.
After a short few seconds after connecting successfully you will see the loaded
voltage change to represent the voltage which the MHP is operating under. You
will also see the current which is being drawn by the USB hub and any devices
connected to it.
