Page 20
Each dew port has a slider which you can drag to set the power level. Once the
correct power level is set to the desired value, click the On/Off button. You will
see the amount of current drawn by the dew tape/EL panel as follows
The Startup Default button will cause the currently set values be stored to the
device and when next started the device will activate these ports at those power
levels. This is handy so that your dew tapes will be powered when starting the
device without having to run the software or even connect the device to a PC.
Please consider the consequences of powering dew tapes on startup by
using the startup default feature. This could have undesired
consequences especially in warm weather.
