36
Memory Preset - Data Save/Load
Memory Preset - Data Save/Load:
The Save Data and Load Data programs make it easy to store and load charge and
discharge profiles for up to 10 batteries per channel. Data can be saved for each
battery type and each charge mode available with the X2 AC Pro. This allows you to
recall data for each battery when charging or discharging without having to set up
the program over again. You can also edit settings for each saved battery.
Save Data:
From the BATT/PROGRAM menu use the
+
or
▬
buttons
to scroll to the BATT MEMORY program and press the
ENTER/Start
►
button to enter the battery memory program. In the corner of
the screen you will see the number 1 flashing, use the
+
or
▬
buttons to scroll
through the memories. When you are ready to select a memory to program,
press the
►
button again to enter the memory setup menu.
Press the
►
button again and the battery type will begin
to flash. Use the
+
or
▬
buttons to select the battery type
(LiPo, LiFe, LiIon, LiHV, NiMH, NiCd or Pb), then press the
►
button to confirm
your selection.
Now you will use
+
or
▬
buttons to scroll through the battery parameters, using
the
+
you will make adjustments in the following order, using the
▬
button will
reverse this order.
Voltage and Number of Cells:
Press the
►
button and
the number of cells will begin to flash. Use the
+
or
▬
buttons to change the cell count then press the
►
button to confirm your selection.
Charge Current:
Press the
►
button and the charge
current value will begin to flash. Use the
+
or
▬
buttons
to change the charge current then press the
►
button to confirm your selection.
Discharge Current:
Press the
►
button and the discharge
current value will begin to flash. Use the
+
or
▬
buttons
to change the discharge current then press the
►
button to confirm your
selection.
[BATT MEMORY 1]
ENTER SET ->
BATT TYPE
LiPo
BATT VOLTS
7.4V ( 2S )
CHARGE CURRENT
4.9A
DSCH CURRENT
2.0A
