8 Channel 2.4 GHz Aircraft Computer Radio System
8 Channel 2.4 GHz Aircraft Computer Radio System
Section 5: Acro and Glider Programming Menu
Section 5: Acro and Glider Programming Menu
62
63
1. From the model menu, rotate the jog dial to highlight
“F.COND” and press the jog dial once to enter the flight
conditions menu.
2. Scroll to the flight condition to be configured and press the jog
dial to confirm your selection.
3 Press the jog dial again to activate the switch selection menu (not
applicable in “Normal” flight condition).
4. Scroll to select the switch that you will use to activate this flight condition and press the jog dial to confirm
your selection.
a. If “NULL” is selected, the flight condition will be inactive.
b. If you selected a switch, the switch position menu will appear.
- Scroll to highlight the switch position that you will use to enable
the flight condition. Press the jog dial to confirm your selection.
Flight Conditions cont.
- Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the top right
corner of the screen will indicate which flight condition is active.
If more than one flight condition is concurrently enabled, the condition with the highest
number (per the table shown above) will be active. The field just below the model icon on the
Home screen indicates the active flight condition.
Note
Tip
Tip
Tip
Caution
- Press the back button twice to return to the flight conditions menu.
Flight Conditions cont.
7. Press the back button to return to the flight conditions menu and repeat steps 2-6 to define further
flight conditions.
8. Press the back button twice to return to the model function menu.
Aileron Differentials
The Aileron Differential function allows you to program greater upward aileron movement than
downward movement on models with more than one wing servo. This setup is commonly used to correct
airplanes that tend to yaw in the opposite direction of a roll (adverse yaw). You may also wish to configure
aileron-rudder mixing in this situation.
5. Scroll to highlight the “SPEED” field and press the jog dial to
activate the menu.
6. Scroll to define the amount of time (0.0 to 10.0 seconds) to
transition the settings when this flight condition is enabled. Press
the jog dial to confirm your selection. This feature can be utilized
to prevent sudden control surface movements when switching
between flight conditions.
1. From the model menu, rotate the jog dial to highlight “AIL DIFF”
and press the jog dial once to enter the aileron differential menu.
2. Scroll to the “RATE” field and press the jog dial to activate the
menu.
3. Rotate the jog dial to input the desired rate value. This value
represents the difference between 100% downward travel and
the adjusted travel. A rate value of 50 is typically a good starting
point. Note that the travel values displayed in the “AILE” and
AIL2” fields reflect changes to the rate value.
