Hitachi ZX170W-5A Скачать руководство пользователя страница 8

Страница: 8 / 61

SAFETY

SA-2

SA-003

Follow Safety Instructions



Carefully read and follow all safety signs on the machine

and all safety messages in operator's manual.



Safety signs should be installed, maintained and replaced

when necessary.



If a safety sign or operator's manual is damaged or

missing, order a replacement from your authorized dealer

in the same way you order other replacement parts (be

sure to state machine model and serial number when

ordering).



Learn how to operate the machine and its controls correctly

and safely.



Allow only trained, qualified, authorized personnel to

operate the machine.



Keep your machine in proper working condition.



Unauthorized modifications of the machine may impair

its function and/or safety and affect machine life.



Do not modify any machine parts without authorization.

Failure to do so may deteriorate the part safety, function,

and/or service life. In addition, personal accident,

machine trouble, and/or damage to material caused by

unauthorized modifications will void Hitachi Warranty

Policy.



Do not use attachments and/or optional parts or

equipment not authorized by Hitachi. Failure to do so

may deteriorate the safety, function, and/or service life

of the machine. In addition, personal accident, machine

trouble, and/or damage to material caused by using

unauthorized attachments and/or optional parts or

equipment will void Hitachi Warranty Policy.



The safety messages in this SAFETY chapter are intended

to illustrate basic safety procedures of machines. However

it is impossible for these safety messages to cover every

hazardous situation you may encounter. If you have any

questions, you should first consult your supervisor and/

or your authorized dealer before operating or performing

maintenance work on the machine.

WLBJE0-EN-00

Содержание ZX170W-5A






























































Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды

Hitachi ZX170W-5A, Руководство по ремонту

Результаты поиска

Содержание ZX170W-5A

Отзывы:

Похожие инструкции для ZX170W-5A

Бренды по названию

Популярные бренды